160 LB/HR MORAN BILLET ATOMIZER INJECTOR - OUT OF STOCK

MORAN BILLET ATOMIZER INJECTOR

$0.00

Select the fuel that will be used with your MRE Injectors

How many cylinders?

What is your approx. maximum hp?

What power adder are you using?

160 lb/hr / 1680 cc  Injectors - OUT OF STOCK

 

Not sure which injector size you need? Mike Moran can help! Just call or email us today at sales@moranmotorsports.com. 

FUEL INJECTOR SPECIFICATIONS: 
160 lb/hr MORAN BILLET ATOMIZER INJECTOR
PART# MRE 160A2
Static Flow Rate = 160
Impedence = Low
Resistance = 1.6
Fuel Pressure Rating = 43.5 psi
Nozzle Style = Atomizer Disc
Spray Angle = Large Fog with 45 degree Vapor Cone Pattern

MORAN Billet Atomizer Injector 
EFI guru Mike Moran makes it easy for EFI engines to produce 1,000 to 4,000 HP with either gasoline or methanol, with the new M.R.E. Atomizer fuel injector. Machined from a proprietary material, coated with titanium nitride, these Atomizer injectors flow 100lb/hr @ 43.5 psi fuel pressure. The Atomizer disc is the NEW design. This new design exceeds the Powertip 5; more horsepower, faster throttle response and cuts spool up time in half on all force induction applications. All Moran injectors were designed as specifically for racing. The injectors operate linearly with pulse width as small as 1.2 milliseconds and opens with the standard 4 amp peak and 1 amp hold ECU drivers. Plus the M.R.E. Atomizer injector is a direct replacement for all standard injectors and are compatible with all aftermarket E.F.I systems out of the box, no injector driver adapters needed.

Atomizer Technology 
The new injector coils were designed to be 60% stronger in magnetics and therefore should be a huge improvement in both the capacity and range of the injectors.

Our MORAN Atomizer Injectors were researched, developed, engineered, and tested over 10 years by Mike Moran specifically for racing. Other injectors used for racing were originally designed to flow Compressed Natural Gas (CNG)! 

Our 5mm projected tip design extends directly into the intake runner, beyond all others, ensuring max efficiency. 

MRE Atomizer Racing Injectors are a proprietary product that you can’t get anywhere else. Each injector is built as per your order, flow tested and then shipped. Please call or email us if you have any questions, and we’ll be happy to assist you in any way. 

Recommended Products
WELDON FUEL FILTER 10 MICRON…………………………..$91.00
Filter - CAUTION - It is Mandatory to use a 10 Micron filter with our MRE Injectors. You must run a 10 micron filter between the injectors and the fuel pump, NOT between the fuel pump & fuel tank.
- For GAS Users: Moran Motorsports recommends & sells Weldon 10 Micron fuel filters.
- For METHANOL Users: Moran Motorsports offers a 10 Micron stainless steel methanol safe filter with assembly.

MRE Atomizer II Injector Instructions, Warranty & Disclaimer Information

Select the fuel that will be used with your MRE Injectors

How many cylinders?

What is your approx. maximum hp?

What power adder are you using?

Price: $0.00
SKU: MRE160A2